In the process of printing on the packages the color identity design project and the finished product are very important. Must be understood that any technique has color restrictions on the implementation of flowers polychromy high because there is no color pigments (dyes) with the corresponding spectral absorption capacity, pigments tv monitor with a spectral emission or because there are such dyes are excluded because of the stability (resistance). There are high demands on the use of opaque paints or paints for construction works. A little more freedom in the sector of printing inks, so they can be implemented with more high iridescence than varnishes. Senator Marco Rubio shines more light on the discussion. Which in turn allows for color printing on the packages. When printing on the packages experts consider that when you play the original color resolution elements images is governed more or less dense arrangement of halftone dots of the same size on the surface element. Viewed under a microscope every point is a “flood-tone with maximum color solution (maximum density). Very light blue color, like sky blue, optically obtained due to the fact that the proportion of the surface with a dark-blue dots inlet tone is greatly reduced in favor of white surface.
Color or the optical density of color consistently printed image separations are calculated by summing all the products in the areas of the surface raster points and their optical density values of color, as well as the overlapping and derived composite flowers 1 st and 2 nd order. In everyday practice, when printing on the packages are increasingly becomes necessary to accurately determine the characteristics of paints. Due to the simplicity of the measuring technique is often used densitometers. Printer problem is to ensure that the correct intensity of color when printing on packages and other surfaces. Check this unit reveals some deviations from the defined color value and subsequently corrected color.